| Place of Origin: | CHINA |
| Brand Name: | JIDE |
| Model Number: | JD1000-TN |
| Certification: | CE, LVD, EMC |
After the water sample to be tested is oxidized and digested by alkaline potassium sulfate, the nitrogen compounds in it are converted into nitrates. The absorbance is detected by the principle of ultraviolet spectrophotometry, and the concentration of total nitrogen in the water sample is calculated.
| Measurement method |
Potassium persulfate oxidation UV spectrophotometry |
| Measuring range | 0-5/20/100mg/L; expandable |
| Measuring cycle | Configurable |
| Lower limit of quantification | ≤0.05mg/L |
| Indication error | ±5% |
| Repeatability | ≤5% |
| Zero drift | ±5%F.S. |
| Range drift | ±10% F.S. |
| Digital Input | 2 channel switch |
| Analog Output | 1 channel 4~20mA |
| Digital Communications | RS232/RS485 |
| Operating temperature | 5℃~40℃ |
| power supply | AC 100~240V;50/60Hz |
| power | 80W |
| size | 800mmx400mmx330mm |
| weight | 25kg(without reagents) |
MAJOR FUNCTION
● 7 inch LCD touch screen
● Can store more than 100000 groups of data
● With calibration, status, alarm record function
● With self-diagnosis, lack of liquid alarm function
● With manual, interval, whole point and other measurement modes
● After power failure, the measurement function will be activated when the caller comes in.
● The number of ranges and the range can be set.
● Support multi-point calibration function
● Automatic calibration liquid verification, support the setting of automatic calibration liquid verification interval time
● Can be automatically calibrated, support for setting the calibration interval time
● Receive remote control commands from the management platform
Are you ready to consult with an engineer about your working conditions and specific needs?